How It Works

Solar pool heating, explained

No electricity, no monthly gas bill — just your existing pool pump and the sun. Here's how the system heats your water, and what it's like to work with us from that first call to swimming warm.

Four solar pool heating collectors on a tan tile roof, with the plumbing running down toward the gutter

The technology

How solar pool heating works

Your pool pump sends water up to black solar pool panels on the roof. The sun warms it on the way across, and it comes back down into the pool a little warmer every pass, all day, on its own. Nothing here makes electricity: no inverters, no batteries, nothing tied to your utility bill.

Skip to working with us

The whole system as a model: the pool pump sends cool water up the side of the house to the solar pool panels on the roof, and warm water comes back down to the pool
  1. The pool pump and filter beside the house, with a pipe running up the wall to the roof

    01The pump

    Cool water goes up

    The pool pump you already own sends water through the filter and up to the roof. No new motor, no gas line.

  2. Black solar pool heating panels on a tile roof, warming as water flows across them

    02The panels

    In cool, out warm

    Inside every panel the water spreads through hundreds of small tubes and soaks up the sun's heat, the way a garden hose left out in the yard does. No fuel burned, nothing metered.

  3. The warm return pipe running down the side of the house and back into the pool

    03Back down

    Warm water comes down

    A second pipe carries it back to the pool, a little warmer every pass, all day long.

  4. Close up of the solar controller on the wall, its screen reading the pool temperature, the temperature set for it, and solar heating on

    04The controller

    Smart enough to leave it alone

    You set the pool temperature you want once, like a thermostat. The controller sends water up while the sun can add heat and stops when the pool gets there. Nothing to remember.

Working with us

From first call to swimming warm

Same crew, start to finish — nothing handed off to a subcontractor.

1. Free quote

Call us, or build an estimate online from satellite imagery of your roof — no obligation either way.

2. On-site design

We look at your roof, your sun exposure, and your pool equipment, then design a system sized to fit.

3. Installation

Our own crew installs and tests the whole system — typically complete in one to two days.

4. Warranty & support

A 12-year panel warranty and a 1-year warranty on our work — and the same team to call if you ever need us.

See it for yourself

Don't take our word for it

We log live temperature data from our own pool and spa around the clock, right alongside an unheated control — so every comparison is a real measurement.

FAQ

Common questions

No. Beyond your existing pool pump, nothing else runs. There are no inverters, batteries, or extra equipment — just plumbing up to the roof and back.

Enough to swim close to three months longer than an unheated pool. Around Riverside, a properly sized system makes the season about mid-April to late October, instead of early June to late September. We publish round-the-clock measurements from our own system on our live data page, so you can see real numbers instead of a promise.

Quotes are usually scheduled within a few days of your call, and installation itself takes one to two days. We'll give you a firm timeline for your specific project during the on-site visit.

Every installation includes a 12-year manufacturer's warranty on the panels and a 1-year warranty on our work. See our warranty page for the full details.

Ready to see it working at your house?

Free quote, no obligation — same crew from design through install.